Spiderman Posted July 25, 2023 Share Posted July 25, 2023 On 7/23/2023 at 5:04 PM, stoney said: I do not know, I think it provided them a life line to remain in the market a bit longer than they would have if they did not partner with another manufacture. 100% - they had no chassis The RX-1 tonne was not going to keep them afloat. Quote Link to comment Share on other sites More sharing options...
Canuck Posted July 25, 2023 Share Posted July 25, 2023 2 hours ago, Spiderman said: The RX-1 tonne was not going to keep them afloat. RX-1 tonne and ' float ' in the same.e sentence. Not that beast Innovative as heck. Exhaust out the back ( loved it on my Apex ). But she certainly didn't ' float ' by any stretch of the imagination. 1 Quote Link to comment Share on other sites More sharing options...
signfan Posted July 26, 2023 Share Posted July 26, 2023 Looks like those prices are official. https://www.fcmq.qc.ca/en/trail-permit/line-trail-permits Quote Link to comment Share on other sites More sharing options...
stoney Posted July 26, 2023 Share Posted July 26, 2023 7 hours ago, signfan said: Looks like those prices are official. https://www.fcmq.qc.ca/en/trail-permit/line-trail-permits So $440 for early QC to a TBD early ON permit, that was what last year, around the $200 mark. The delta seems to be growing…. $ 440 for an annual trail permit purchased on or before December 9, 2023 $ 530 for an annual trail permit purchased after December 9, 2023 $ 900 for an annual trail permit sold in trail* $ 400 for an annual trail permit for antique snowmobiles (2003 and older) $ 285 for a 7-day trail permit $ 185 for a 3-day trail permit $ 95 for a 1-day trail permit $ 650 for an annual trail permit for a rental snowmobile $ 40 for a replacement trail permit Quote Link to comment Share on other sites More sharing options...
Ox Posted July 27, 2023 Share Posted July 27, 2023 On 7/25/2023 at 5:03 PM, Canuck said: RX-1 tonne and ' float ' in the same.e sentence. Not that beast Innovative as heck. Exhaust out the back ( loved it on my Apex ). But she certainly didn't ' float ' by any stretch of the imagination. Only 1 ton I ever rode with ... IDK that it floated or not, but at the speed that thing went, it didn't need to. Yami dealer in Gunnison, Colorado had a 2 stage (?) turbo set-up on his, with a 163 track. My 163 x 2.25 tracked Summit made it 25-30% of the way up the big hill, and I turned out. My chum made it 1/2 way, and turned out. (it was really rotten snow! Seriously...) Mr. WonTon went over the top so hard that he aired the whole thing out with remarkable ease! OH friggin WOW! Makes a fella feel a bit ... inconsequential ..... . 1 Quote Link to comment Share on other sites More sharing options...
crispy Posted August 3, 2023 Share Posted August 3, 2023 On 7/23/2023 at 8:45 AM, Wildbill said: Stingray still makes real boats leave them in the water no problem. As for Yamahethe day that they announced thedeal with Textron was the death sentence for the brand. Ranger also uses vinylester under the gel coat to seal the hull. Not so sold on the strength of Ranger transoms however lol. Anyways there are some well built glass boats out there I was generalizing because for the majority of them they are all polyester which is still good if done well. Its not like leaving a poly hull in the water for an entire summer is going to do much harm. IIRC the scheduled service is to pull them out for a 3 day dry off every 3 months or something like that. Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 3, 2023 Share Posted August 3, 2023 1 hour ago, crispy said: Ranger also uses vinylester under the gel coat to seal the hull. Not so sold on the strength of Ranger transoms however lol. Anyways there are some well built glass boats out there I was generalizing because for the majority of them they are all polyester which is still good if done well. Its not like leaving a poly hull in the water for an entire summer is going to do much harm. IIRC the scheduled service is to pull them out for a 3 day dry off every 3 months or something like that. Aluminum are nice now too. Depends where and how you using boat. For occasional use, I would prefer aluminum hulls. Good enough for all in land lakes. 1 Quote Link to comment Share on other sites More sharing options...
LuvMyViper Posted August 3, 2023 Author Share Posted August 3, 2023 2 hours ago, Strong Farmer said: Aluminum are nice now too. Depends where and how you using boat. For occasional use, I would prefer aluminum hulls. Good enough for all in land lakes. And horrible for the great lakes. I popped 35 rivets in my 18ft. aluminum hull bowrider and the boat filled with water(almost sank). The main support beam broke (front and center of the hull). Banging those Lake Erie waves was just too much for the boat. 1 1 Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 3, 2023 Share Posted August 3, 2023 3 hours ago, LuvMyViper said: And horrible for the great lakes. I popped 35 rivets in my 18ft. aluminum hull bowrider and the boat filled with water(almost sank). The main support beam broke (front and center of the hull). Banging those Lake Erie waves was just too much for the boat. Great Lakes I wouldn’t go into with an aluminum that’s for sure. Glad you ok. 1 Quote Link to comment Share on other sites More sharing options...
LuvMyViper Posted August 3, 2023 Author Share Posted August 3, 2023 3 minutes ago, Strong Farmer said: Great Lakes I wouldn’t go into with an aluminum that’s for sure. Glad you ok. My butt still hurts from the $4,500 repair bill. 3 Quote Link to comment Share on other sites More sharing options...
zoso Posted August 3, 2023 Share Posted August 3, 2023 7 hours ago, LuvMyViper said: And horrible for the great lakes. I popped 35 rivets in my 18ft. aluminum hull bowrider and the boat filled with water(almost sank). The main support beam broke (front and center of the hull). Banging those Lake Erie waves was just too much for the boat. There are some very very nice and solid all welded aluminum hulls for big water. King Fisher, Henley, and many others. In BC you see many on the big water. A .01 riveted aluminum is the most basic small lake fishing hull, they used to be even thinner. Lund a premium priced brand still uses rivets. Pass. 1 Quote Link to comment Share on other sites More sharing options...
LuvMyViper Posted August 3, 2023 Author Share Posted August 3, 2023 42 minutes ago, zoso said: There are some very very nice and solid all welded aluminum hulls for big water. King Fisher, Henley, and many others. In BC you see many on the big water. A .01 riveted aluminum is the most basic small lake fishing hull, they used to be even thinner. Lund a premium priced brand still uses rivets. Pass. Unfortunately mine boat is a Spectrum with rivets. The manufacturer told me the boat was made for small inland lakes not Great Lakes. It happened to me after a pounding 25 mile drive back from Port Dover. I rode it hard because it was advertised as a super tough hull, for small inland lakes the manufacturer told me after the incident.. Doh Quote Link to comment Share on other sites More sharing options...
Canuck Posted August 3, 2023 Share Posted August 3, 2023 Good info. Wasn't aware Lund uses rivets. Quote Link to comment Share on other sites More sharing options...
RAMSOMAIR Posted August 3, 2023 Share Posted August 3, 2023 well this thread sure has tanked 1 Quote Link to comment Share on other sites More sharing options...
Re:Leaf Posted August 3, 2023 Share Posted August 3, 2023 I think it’s riveting 1 5 Quote Link to comment Share on other sites More sharing options...
RAMSOMAIR Posted August 3, 2023 Share Posted August 3, 2023 Bahaha. Much better when welded. 1 Quote Link to comment Share on other sites More sharing options...
signfan Posted August 4, 2023 Share Posted August 4, 2023 The thread hasn't completely sunk yet. 1 2 Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 4, 2023 Share Posted August 4, 2023 2 hours ago, signfan said: The thread hasn't completely sunk yet. Too bad Yamaha done . I remember sponge Bob sinking his skidoo in channel beteeen joe and ros and someone on an Yamaha apex comes plowing thru water as he swims towards shore. Was a near miss that day and yes wontonne made it back onto solid ice 🤣. Good old days. 2 Quote Link to comment Share on other sites More sharing options...
PISTON LAKE CRUISER Posted August 4, 2023 Share Posted August 4, 2023 8 hours ago, Strong Farmer said: Too bad Yamaha done . I remember sponge Bob sinking his skidoo in channel beteeen joe and ros and someone on an Yamaha apex comes plowing thru water as he swims towards shore. Was a near miss that day and yes wontonne made it back onto solid ice 🤣. Good old days. The Yammie probably sank shortly after. They don't do water skipping well at all. Need an old Indy to have a great skipper. 1 Quote Link to comment Share on other sites More sharing options...
Spiderman Posted August 4, 2023 Share Posted August 4, 2023 28 minutes ago, PISTON LAKE CRUISER said: The Yammie probably sank shortly after. They don't do water skipping well at all. Need an old Indy to have a great skipper. Wedge and Edge were great on the water I could run Dorset all day quarter throttle on my Pro X 600 2 Quote Link to comment Share on other sites More sharing options...
RAMSOMAIR Posted August 4, 2023 Share Posted August 4, 2023 9 hours ago, Strong Farmer said: Too bad Yamaha done . I remember sponge Bob sinking his skidoo in channel beteeen joe and ros and someone on an Yamaha apex comes plowing thru water as he swims towards shore. Was a near miss that day and yes wontonne made it back onto solid ice 🤣. Good old days. That was me, sorry! Quote Link to comment Share on other sites More sharing options...
RAMSOMAIR Posted August 4, 2023 Share Posted August 4, 2023 1 hour ago, PISTON LAKE CRUISER said: The Yammie probably sank shortly after. They don't do water skipping well at all. Need an old Indy to have a great skipper. My Apex was fantastic on water. Ram Dorset a couple times and the Port Sandfield bridge was a common occurrence. 1 Quote Link to comment Share on other sites More sharing options...
Ox Posted August 4, 2023 Share Posted August 4, 2023 17 hours ago, zoso said: There are some very very nice and solid all welded aluminum hulls for big water. King Fisher, Henley, and many others. In BC you see many on the big water. A .01 riveted aluminum is the most basic small lake fishing hull, they used to be even thinner. Lund a premium priced brand still uses rivets. Pass. What exactly is a ".01" rivet or alum? Shirley you don't mean .010" thick material? Tha'd be a bloody Dr. Pepper can! . Quote Link to comment Share on other sites More sharing options...
04nightfire Posted August 4, 2023 Share Posted August 4, 2023 The Nytro did alright 6 Quote Link to comment Share on other sites More sharing options...
RAMSOMAIR Posted August 4, 2023 Share Posted August 4, 2023 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.