apeXMAN Posted January 30, 2017 Share Posted January 30, 2017 Buns of steel..Ha Ha! sorry SJ Link to comment Share on other sites More sharing options...
02Sled Posted January 30, 2017 Share Posted January 30, 2017 1 hour ago, Denis007 said: 'Nuff said ..... Something tells me you're going to catch heck for this one Link to comment Share on other sites More sharing options...
Techdenis007 Posted January 31, 2017 Share Posted January 31, 2017 9 hours ago, 02Sled said: Something tells me you're going to catch heck for this one I'm still giggling my arse off over that picture !!!!! And I'm sure SJ got a chuckle from it too ... ! Link to comment Share on other sites More sharing options...
sledjunk Posted January 31, 2017 Author Share Posted January 31, 2017 Just wait till next week Link to comment Share on other sites More sharing options...
catinental couch Posted January 31, 2017 Share Posted January 31, 2017 Story to follow? Stay tuned? Link to comment Share on other sites More sharing options...
Techdenis007 Posted January 31, 2017 Share Posted January 31, 2017 1 hour ago, catinental couch said: Story to follow? Stay tuned? Never a dull moment !!! Link to comment Share on other sites More sharing options...
Yamatario Posted February 1, 2017 Share Posted February 1, 2017 l put the WRP seat on my Nytro. it was great, firmer (not like 2x6 buried in it) and +2 higher. http://www.wr-products.com/products/2012-2016-yamaha-vector-seat Link to comment Share on other sites More sharing options...
livin' on the b103 Posted February 1, 2017 Share Posted February 1, 2017 I had the personal displeasure of sitting on that seat, in a static situation it was not comfy!! Livin' Link to comment Share on other sites More sharing options...
livin' on the b103 Posted February 1, 2017 Share Posted February 1, 2017 To clarify, sledjunks sled seat, not the seat in the picture!! Livin' Link to comment Share on other sites More sharing options...
Techdenis007 Posted February 1, 2017 Share Posted February 1, 2017 47 minutes ago, livin' on the b103 said: To clarify, sledjunks sled seat, not the seat in the picture!! Livin' Maybe Sledjunk is trying to modify the wrong seat ? Link to comment Share on other sites More sharing options...
catinental couch Posted February 1, 2017 Share Posted February 1, 2017 Waiting for Sledjunks reply...... Link to comment Share on other sites More sharing options...
livin' on the b103 Posted February 1, 2017 Share Posted February 1, 2017 Dude, both those seats are so wrong. Again, I only sat on one of those seats!! Livin' Link to comment Share on other sites More sharing options...
Techdenis007 Posted February 1, 2017 Share Posted February 1, 2017 55 minutes ago, catinental couch said: Waiting for Sledjunks reply...... Link to comment Share on other sites More sharing options...
sledjunk Posted February 1, 2017 Author Share Posted February 1, 2017 Sure pick on me when I'm driving! I was thinking about the WRP Seat but had heard mixed reviews. I am going to attempt another shot at fixing this seat, but if not acceptable, the WRP will be installed for next season. Link to comment Share on other sites More sharing options...
Wildbill Posted February 1, 2017 Share Posted February 1, 2017 6 hours ago, sledjunk said: Sure pick on me when I'm driving! I was thinking about the WRP Seat but had heard mixed reviews. I am going to attempt another shot at fixing this seat, but if not acceptable, the WRP will be installed for next season. I got a BOSS seat for my sled so far I really like it Link to comment Share on other sites More sharing options...
skidooboy Posted February 1, 2017 Share Posted February 1, 2017 boss seats for the win! when you modify anything, it is a crap shoot. you will love it, or hate it, or tolerate it. trying to get "regular upholstering shops" to update a seat on a sled is a gamble at best. they know cars, boats ect... they don't understand regular material foam gets REALLY STIFF, in cold temps. you need a seat mfg to BUILD YOU A CUSTOM SEAT, not modify stocker. boss has been the premier seat builder for sleds for decades. Ski Link to comment Share on other sites More sharing options...
sledjunk Posted February 1, 2017 Author Share Posted February 1, 2017 From what I see, Boss doesn't make a sea for my sled Link to comment Share on other sites More sharing options...
Wildbill Posted February 2, 2017 Share Posted February 2, 2017 12 hours ago, sledjunk said: From what I see, Boss doesn't make a sea for my sled That is too bad . Mine is awesome maybe send them an email. Link to comment Share on other sites More sharing options...
sledjunk Posted February 18, 2017 Author Share Posted February 18, 2017 Here is an update. ApeXman came over today to see if we could make the seat any better. When we removed the cover, we found a pad of about 2 inches of soft foam attached to a very soggy pad. This was glued down and we carefully removed it. We found a treasure underneath. Yes!! This is a block of 3 inch Styrofoam. It now measures only 2.5 inches and as you can see, has split into two pieces. This was on top of a bed of what looks like spray foam insulation! Thank goodness that on the first attempt, he returned the original foam piece to me!! We first removed all of this garbage and then built the seat back to approximately stock. We then cut some new foam that I had purchased that was a 2.6 density and a 51 firmness. This piece was 2 inches thick. We filled all of the voids around the new foam and recovered the seat. I now can bounce on the seat without hurting myself, and I am sitting within a 1/4 inch of the height on the styrofoam. Thank you to apeXman for all his help. Link to comment Share on other sites More sharing options...
Turbo Doo Posted February 18, 2017 Share Posted February 18, 2017 37 minutes ago, sledjunk said: Here is an update. ApeXman came over today to see if we could make the seat any better. When we removed the cover, we found a pad of about 2 inches of soft foam attached to a very soggy pad. This was glued down and we carefully removed it. We found a treasure underneath. Yes!! This is a block of 3 inch Styrofoam. It now measures only 2.5 inches and as you can see, has split into two pieces. This was on top of a bed of what looks like spray foam insulation! Thank goodness that on the first attempt, he returned the original foam piece to me!! We first removed all of this garbage and then built the seat back to approximately stock. We then cut some new foam that I had purchased that was a 2.6 density and a 51 firmness. This piece was 2 inches thick. We filled all of the voids around the new foam and recovered the seat. I now can bounce on the seat without hurting myself, and I am sitting within a 1/4 inch of the height on the styrofoam. Thank you to apeXman for all his help. Sounds good.. maybe ill try this new seat out in a week or so..Hehe.. Link to comment Share on other sites More sharing options...
Blake G Posted February 18, 2017 Share Posted February 18, 2017 Sledjunk, I bet you're not impressed with the guy who put that blue styrofoam on your seat. Link to comment Share on other sites More sharing options...
Wildbill Posted February 18, 2017 Share Posted February 18, 2017 holy fug who did that ? hemorrhoid helper anyone ? Link to comment Share on other sites More sharing options...
Techdenis007 Posted February 18, 2017 Share Posted February 18, 2017 1 hour ago, Blake G said: Sledjunk, the guy who put that blue styrofoam on your seat deserves a . . . . . . . . . . . . Don't laugh but I've got no less than 4 inches thick of styrofoam in my seat , and it's far more comfortable than before modification. Not perfect, needs an edit , but decent. Link to comment Share on other sites More sharing options...
sledjunk Posted February 18, 2017 Author Share Posted February 18, 2017 10 hours ago, Wildbill said: holy fug who did that ? hemorrhoid helper anyone ? A 'professional' Link to comment Share on other sites More sharing options...
Turbo Doo Posted February 18, 2017 Share Posted February 18, 2017 Maybe you will avoid buying a DOO after all.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.