Bigfish

I bought a set of Kimpex/Rouski this year online. Package arrived with 2 left side units. One call to Kimpex and the right side unit was couriered to the door next day. Not bad srvice IMHO.

Too confusing! I'll just stick to putting the sled in the back of my vehicle.!

Clear as mud!!! Ontario Proposes Amendments to HTA The Ontario Ministry of Transportation (MTO) would like to inform you of proposed amendments related to annual inspections. MTO is proposing to exempt pickup trucks and trailers used exclusively for personal use from the requirement for an annual inspection. Details of the proposal are posted on the Regulatory Registry for public feedback until June 1, 2019. Comments may be submitted through the Regulatory Registry posting, or via email to the attention of Susan Dolenec at cspo@ontario.ca. Feedback will be reviewed and taken into consideration. Adjustments to the proposal may be made, based on this feedback, prior to seeking approval. Subject: Regulatory Registry - Amendments to O.Reg. 413/05, Vehicle Weights and Dimensions (VWD) for Safe, Productive, and Infrastructure-Friendly (SPIF) Vehicles Ontario Heavy Vehicle Stakeholders, The Ontario Ministry of Transportation would like to inform you and your members of potential amendments to Ontario Regulation 413/05, Vehicle Weights and Dimensions (VWD) for Safe, Productive, and Infrastructure-Friendly (SPIF) Vehicles. The amendments include the following: • Eliminate the need for special vehicle configuration permits currently required to operate long wheelbase tractors with multi-axle semitrailers, longer saddlemounts, and semitrailers equipped with smart lift axles. • The same tire weight allowance for wide based single tires as to dual tires when mounted on single axles; • Loading of boats on stinger-steer auto carriers under the same weight and dimensional limits; • Modify the conditions to allow the use of an Emergency Lift Axle Override, so to lift the self-steering axle in emergency situations improving the general safety operation of the truck. The above-note amendments are detailed in the regulatory registry posted here: https://www.ontariocanada.com/registry/view.do… Comments posted to the regulatory registry must be submitted by the date indicated,June 1, 2019. Once the comment period is closed, the Ministry will review comments reviewed toward considering adjustments to the proposed regulation, before moving forward toward implementation. Please note that the for the Emergency Lift Axle Override in-cab controls, the regulation is proposed to reflect the following: • Subsection 5 (2) of the Regulation would be amended to reflect the requirement, if requested by the customer, for an Emergency Lift Axle Override control within the cab of the truck. ◦ If the truck or tractor was built on or after January 1, 2020, the control is an emergency lift axle override control that meets all of the following conditions: ▪ It allows the driver from the cab of the truck or tractor to lift, alter or deploy the weight on a self-steering axle of the truck or of any drawn trailer. ▪ It is separate and independent from the 4-way flasher control. ▪ The words “Emergency Lift Axle Override” appear adjacent to the control. ▪ It activates the emergency 4-way flashers. ▪ It only lifts, alters or deploys, • in the case of a tractor-trailer combination, the most forward self-steering axle of the semi-trailer, or • in the case of a truck, the self-steering axle or forced-steer auxiliary pusher axle. ▪ It begins the lifting or altering of weight immediately upon activation. ▪ It does not allow the axle to be lifted or its weight altered when the truck or vehicle combination is travelling at a speed over 60 kilometres per hour. ▪ It fully deploys the self-steering axle, • immediately upon the vehicle stopping, • immediately upon the tractor power being turned off, and • within three minutes after the lifting or altering of weight.

Made in Finland???

93 AC 550 EXT

Yeah, that's where he was. Apparently there is an obcsure sign in a tree indicating no parking!

Beware of parking in Gilmour off the B106. Buddy had his truck and trailer towed to Bancroft, cost him $350 to get it back

There is dumb, and then there is stupid!

Got banned, eh?

Now we're talkin'

The Kimpex/Rouski kit I have came with 12.9 bolts.

Just installed a set of Rouskis on a set of Yamaha Gen 3 Tuner skis. Other than the problem of opening the box and finding the right was for a gen 3 and fit fine, the left was for some other ski, and the whole thing had to go back to Kimpex. Took a week to get the right product!

Are they complete? I noticed a missing carb in your pic Might be interested in another restoration project.

Welcome the Long Lake/Miskwabi Lake are two of my favourite trails, you will enjoy them for sure. Too bad I won't be sledding in Ontario this year, but there is always next year!

Sleds in our group run between 9 and 15 years old, not quite as old as an 87, but maintenance and servicing is imperative. We also agree before heading out that if any sled goes down, the group will assist in getting it to an access point, make a call to our pre-arranged pickup guy, but then he is on his own, and the rest of the group will continue with the trip. As mentioned in a previous post, it is not always the old sled that goes down!