Nunz Posted February 27, 2023 Share Posted February 27, 2023 On 2/23/2023 at 8:54 AM, Steve F6 said: I put the "treks" on and they work good but they dont like reverse. Grabs hard and track spins. Did u find that as well? I have a set of the adventures here too that i should try but the only reason i put the treks on was difficulty putting the adventures on after my sub par drilling and measuring install on the skis. exact same thing I found with mine, reverse is near next to impossible with the Trek's, I am switching mine to the 8 inch carbide Adventures for our New Brunswick trip and see how it goes. Quote Link to comment Share on other sites More sharing options...
zoso Posted March 1, 2023 Share Posted March 1, 2023 I have had good results with slim jims. Quote Link to comment Share on other sites More sharing options...
soupkids Posted March 1, 2023 Share Posted March 1, 2023 Big thing with any carbide runners and backing up. File or grind the back edge if the carbide at a 45, helps alot when backing up. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.