Jump to content

FS: Parting out 2003 Pro-X 800 w/ SLP Perf.Package, Oshawa


canuckrider

Recommended Posts

Still have the following parts available:

-ownership, tunnel, bulkhead, bellypan etc. (and pretty much anything else riveted to it)

slight damage, make an offer

-pro-x seat (black/red/blue) $250

-gas tank black, fuel gauage/cap$65

-chrome windshield $30

-black console $40

-stock pipe (barely used replaced with slp) $100

-stock can (barely used replaced with slp) $100

-stock y-pipe (barely used replaced with slp) $30

-blue polaris snow flap $25

-pro-x right trailing arm $100

-1 good ryde fx front shock $150

-1 bent ryde fx front shock for parts $50

-1 full rear skid with shocks $350

(or without rear shocks, just skid $200)

-2 rear ryde fx shocks $150each

-2 rear torque arms $75each

-parts rear skid with rails $100, front and rear torque arms $75, assemblies, wheels, shafts etc.

-rear bumper $30

-1 USI VX series ski $40

-3 used engine mounts $30

-1 new engine mounts (3021244) $15

-engine torque stopper $20

-2 new NTN drive bearings (AS205-014 & AS205-100) $50

-stock clutch primary spring black/red (barely used replaced with slp) $30

-stock clutch secondary lack/green (barely used replaced with slp) $25

-3 10-64 clutch weights (barely used replaced with slp) $30

-new cross tube shaft (5334197-067) $30

-2 new exahust gaskets (5811799) $30

-2 stock reeds $50

-brake rotor, caliper, pads, brake line, resevoir and brake lever $100

-chain, bearings, sprockets (25T and 40T)

-drive shaft $50

-steering radius rods $40

-steering tie rods $40

-steering rack and steering post $45

-red skid plate $45

-misc. stock air box parts, stock horn, air head etc.

-misc. VES parts: 3 top nuts, 1 orange bellow, 2 blue bellows, 3 new gaskets, 1 new washer, 3 yellow springs, 2 pink springs

-X10 right trailing arm $100

There may be some other parts I am missing, please ask.

Already sold:

-800 SLP motor and all slp perf. packg. parts

-ProX Cover

-USI ski mounts/carbides

-rear torsion springs

-handlebar risers

-pro-x hood

-front bumber

-2 USI VX Series ski mounts

-4 used stud boy carbides 8" for USI VX Series ski

-Team Secondary clutch

-chaincase

-2" handlebar risers

-torque arm

-ski spindles

Email me at simon@kontikisolutions.com

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

Still have the following parts available:

-ownership, tunnel, bulkhead, bellypan etc. (and pretty much anything else riveted to it)

slight damage, probably repairable, make an offer

-pro-x seat (black/red/blue) $250

-gas tank black, fuel gauage/cap$65

-black console $40

-stock pipe (barely used replaced with slp) $100

-stock can (barely used replaced with slp) $100

-stock y-pipe (barely used replaced with slp) $30

-blue polaris snow flap $25

-1 good ryde fx front shock $150

-1 bent ryde fx front shock for parts $50

-1 full rear skid with shocks $350

(or without rear shocks, just skid $200)

-2 rear ryde fx shocks $150each

-2 rear torque arms $75each

-parts rear skid with rails $100, front and rear torque arms $75, assemblies, wheels, shafts etc.

-rear bumper $30

-1 USI VX series ski $40

-2 new NTN drive bearings (AS205-014 & AS205-100) $50

-stock clutch primary spring black/red (barely used replaced with slp) $30

-stock clutch secondary lack/green (barely used replaced with slp) $25

-3 10-64 clutch weights (barely used replaced with slp) $30

-new cross tube shaft (5334197-067) $30

-2 new exahust gaskets (5811799) $30

-2 stock reeds $50

-brake rotor, caliper, pads, brake line, resevoir and brake lever $100

-chain, bearings, sprockets (25T and 40T)

-drive shaft $50

-steering radius rods $40

-steering tie rods $40

-steering rack and steering post $45

-red skid plate $45

-misc. stock air box parts, stock horn, air head etc.

-misc. VES parts: 3 top nuts, 1 orange bellow, 2 blue bellows, 3 new gaskets, 1 new washer, 3 yellow springs, 2 pink springs

-X10 right trailing arm $100

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...