Jump to content

slomo

Established Members
  • Posts

    4,516
  • Joined

  • Days Won

    95

Posts posted by slomo

  1. 1 hour ago, signfan said:

    Gotta be more to this story.  They own their own engine manufacturing plant.  Are they having troubles sourcing parts (bearings, pistons, etc??).

    I will try to locate the thread read in passing....general gist was underestimating the number of engines needed and being shipped for the year with increased numbers ordered for covid. Just something for potential buyers / possibly spring orders for certain models to think about, particularly if the dealer or elsewhere has your last year's sled. 

     

     

  2. If CBC news can be trusted, a new doughnut shop Good Glaze Doughnuts has opened, is expanding, and a new location should be open in time for sledding season. Prior to that they anticipate a new store opening on June 3.....Their stuff looks pretty good...

     

    good-glaze.jpg.b4393181a89a9f185decffc97da10193.jpg

     

    310629461_goodglazemenu.jpg.6c793f2bd630a48d97f2ee551a20c02f.jpg

     

    633527994_goodglaze02.jpg.093e5da08297c00b7dcabe34e139dd3e.jpg

     

    https://www.cbc.ca/news/canada/sudbury/gourmet-doughnut-north-bay-1.6026632?fbclid=IwAR3E5cOi4wZc2_GXVWAGfa_TyEN-_ytCJaprGeOMIXDbLMsg6c1waczeKDE

     

    Will save me a bit of a drive if out on a gourmet donut tour ....web site:

     

    http://www.ggdoughnuts.com/

     

     

    To assuage any fears you may have regarding the accuracy of this article as reported by CBC news, here is their statement of standards and practices...these are stated by legitimate media, unlike the whacko sites which spring up and make up news rather than reporting it. No such statements are displayed on the whacko sites.

     

    CBC news
    https://cbc.radio-canada.ca/en/vision/governance/journalistic-standards-and-practices

     


     

    • Like 2
  3. On 5/11/2021 at 9:26 PM, signfan said:

    If I had a sled on order and it wasn't coming before x-mas can't say I'd put up with it.  This will all pass in a years time.  Guess hanging onto what we have was a good call for another season.

    Noticed on dootalk from some fairly reputable sources (Quebec) that BRP is going to be short 900ace motors and not meet production numbers. I suppose this would include both the NR 900's and the turbos - being the same engine. 

    • Sad 1
  4. Have them hold the sled show on a 36 hole golf course. You buy a ticket and get a "tee time" over the 3 (or more?) days at which time you can start wandering the "course" - keeps spacing safe. Merchants /clubs are set up on tees, greens, and in-betweens. Your admission includes an umbrella. 

     

    Too bad I only thought of this now. 

     

    "Visit Rosseau Road Enterprises for some great deals! We are located at hole number 17."

  5. 1 hour ago, stoney said:

    That’s great to get one!

    I’m guessing you aren’t or weren’t a golfer than as most wouldn’t stop after a HIO. 
     

    However commenting on an activity and its protocols in place given you didn’t partake, really isn’t necessary given the comment you replied to.... sounds like something one of those “characters “ would do :)

     

    And FTR, courses last year had no issues enforcing their rules, even a private course.....I’d even go as far to say the more ritzier club were more stern than the lesser one. 

    That was a pretty good day....dad bought me a celebratory Fanta Lime, there being no Fanta Orange in the machine at the club house...was fifteen cents at the time...although thirteen cents at convenience stores....still remember sliding that bottle along to where it was released once your money was in....

     

    popmachine2.thumb.jpg.eb486303ac0630b2459f9036f60c7a96.jpg

     

    In relation to your comment, I worked part time at a golf course in Mississauga in order to save up money for our wedding - particularly expensive as it involved getting a septic system installed - so I feel qualified to speak on the subject.

    guests.jpg.1522fdddb71eda8255a78d1d064aeb5c.jpg

     

    headtable.jpg.87498711f49d9a1eb18ac6b799de6c01.jpg

     

     

    There is a news comment in the National Post on the same topic - Doug Ford's buddies.  But I have to agree with your basic premise- with the proper protocols in place, golf should be a safe activity. But people will be people.

     

     

     

     

  6. 9 hours ago, stoney said:

    Played plenty of rounds last summer / fall. 
    All drinks or food after round was outside, very limited access to indoors. 

    And it’s the cart lady or ladies on the course or halfway house where the money is made on bevies. 

    Do you or did you play golf last year?

    No - I got a hole in one on hole number six on the Garson golf course near Sudbury many years ago. Gave up the sport as I was never going to do better than that - no challenge left. 

    • Haha 2
  7. 1 hour ago, Strong Farmer said:

    Golf proved that last year when 22 million rounds were played without one case of COVID transmission here in Ontario. Now Ford continues to shut it down and why!  Maybe getting hit in head with ball, poses a greater risk then covid itself, and he is worried about injured golfers going to seek

    medical attention. 😂

    Golf courses make most of their money at the 19th hole - alcohol. At some of the ritzier clubs you will not find many servers with the courage (or fear of losing their jobs) that will tell some well heeled club member what he or she can't do.  All it takes is one person infected and spreading. 

    • Thanks 2
  8. It does not seem to me that the owners have widely advertised the position or its responsibilities - nothing in any of the internet job sites that I can find. I believe the last two managers were hired from the U.S. (could be wrong about that admittedly) Despite the trail closures etc. the optics aren't good for any government help given the broader needs of society currently. 

     

    Just blue skying here but here's a potential solution.....the Lesters hand over the OFSC publicity contract they have to Craig Nicholson and spouse and completely divest themselves from any OFSC involvement. The eliminates the oxymoronic condition that exists where the OFSC bans the use of aftermarket exhaust systems and other such products while an OFSC  magazine advertises and reviews these products. Most of the publicity for the OFSC is done on the internet through email or facebook and the magazine (if you ever got a copy) is largely irrelevant.

     

    The Lesters take over Half Way haven - at their own expense - and create a mecca (just to be inclusive) - a world class facility - for off trail riders, an aspect of the sport for which they have been pushing for years.  This could be done in conjunction with Wawa's "mystery spot"  for those looking for pow back in the woods. In the off season, the same place is used for ATV's which is another sideline of Lester business. With the majority of the clientele staying for 1 night or just stopping for gas and a meal, an expansion in facilities built of used shipping containers could be done rather inexpensively. 

     

    Staff would rotate between the family compound somewhere near Haliburton (?) and Half Way depending on the season.

    The sleddin' Lesters - zeke, abner, cletus, clive, dudley, and forest - would person the place in the winter.

    The atv'n Lesters - jedediah, otis, rueben, bucephelus, buck, cooter, and jed - would run the ATV facility. An extra person is with this team to be in charge of re-supply.

     

    Provided a feud didn't develop between the sleddin' Lesters and the atv'n Lesters, I think it would work. 

    • Like 4
    • Haha 1
  9. 12 hours ago, ArcticCrusher said:

    My wife is smart enough to trust me with the finances and investments as she has no clue.  The model I used is a real one I'm actually using and puts me ahead about 150k a year so tell the class Mr accounting teacher what your fantasy investment to the kids should be, cause using quicktax to file your income tax is hardly worth much.

    Understanding tax obligations is great but understanding tax efficiency goes much farther outside of registered accounts.

    A good exercise would be for the class to create a virtual portfolio for registered and non registered portfolios and see who performs the best.  But who at the secondary level is able to provide that?  

     

     

    That's accounting teacher retired - early - due to very successful investing and discipline over the years. Still have a few irons in the fire though. As for secondary level stock market and other investment strategy games many are available - such as this one: https://www.stockmarketgame.org

    11 hours ago, ArcticCrusher said:

    Also let's not even discuss how to become an entrepreneur as we can all live off government.

    I suppose given your abhorrence of living off the government you'll be donating the tax payer's contribution to the Ontario Teachers Pension Plan to charity? 

  10. 8 hours ago, ArcticCrusher said:

    Who's gonna teach the people teaching it.

    What's your spouse say about that? As I understand from a previous post on here, she is a high school principal? No? Maybe you could be a guest lecturer..

     

    As per Muskoka 1 - other than a rudimentary outline of personal finance concepts, unless the kid has got a part-time job and is handling his/her own money, the information usually goes in one ear and out the other. Most figure they will count on their rap music careers for a good living, and leave the financial end to an accountant. Telling them the tragic tale of MC Hammer didn't work either. 

     

    What I found most useful in 19.9 years of teaching high school accounting was to create  T4 slips with representative income and congruent deductions, (sometimes with RRSP and charitable contributions, sometimes not) General T1 forms, Federal Tax forms and Ontario tax forms and have them complete the income tax filing. You can do this yourself at home - print the blank T4 and other forms available from CRA, enter info in all the boxes and let them have at it. Tax year 2014 works well, as after they have conquered the paper forms, most tax software (Studio Tax for instance) is free for that year and you can use that to follow up. Using the paper version first demonstrates how the process works and ensures all information is understood.

     

    There are all kinds of questions that come up as some tried to claim retirement income at age 16, wondered why there is a volunteer firefighter deduction, found out what an R.R. mailing address is, the difference between E.I. premiums and income, and generally forget to claim the age and personal deductions. Some even marvelled at the $25,000 or more income tax taken off with an annual income of $100K plus, which seemed to most as a lot of money. 

     

    Over the four days it took for them to fight their way to the finish (or not) I would pretend I was the CRA help line and any question was met with me humming the theme song from the movie "Brazil"...do do doo, do do dodo do.... telling them their call was important and would be handled by the first available customer service rep. Not sure who had more fun....me or them. 

     

    I usually ended with the admonishment " if I see any of you guys in a line up at H & R Block at the back of Walmart clutching a single T4 slip, I'll personally send you out the front of that store on the end of my boot". 

     

    • Like 4
  11. 8 hours ago, Sksman said:

    Good practice if you can follow it.

     

    But the YouTube videos of a 165” long track doing a wheelie in 6” of snow are more appealing to the cool crowd then a kid sitting on a shitter reading the Wealthy Barber!.

    If you have kids, buy them the book and get them on the right track early. Most parent don't talk to their kids about money, nor can the majority explain various investment options. 

  12. 8 hours ago, tricky said:

    If you can't pay (cash$$$), you shouldn't play. I agree with Turbo Doo on that. Many expressions that light the path to real financial security come to mind when this is discussed, but the best is "Interest is to be earned, not paid." When I heard the numbers from a local dealer, I couldn't believe the percentage of power toys that were financed. F**king crazy. In my life, I have had a mortgage, one car loan and one start-up furniture loan. The latter two were paid off early. Pay with money you have earned and you will finish on top. I guess it all comes with entitlement. My generation is to blame.

     

    7 hours ago, Turbo Doo said:

    Life choices Tricky. 

     

    Not sure about entitlement - I would say confused priorities. In the "Wealthy Barber" by David Chilton, his strategy is "pay yourself first". (first edition) He advocates your allocations should include pension and savings payments each month to (for)  yourself in addition to paying your external bills. If day to day bills are paid and RRSP's and TFSA's, emergency funds etc. are taken care of to top up levels each year, indulge yourself with what is left over for other things in life. 

  13. 12 hours ago, Gadgetman said:

    No new trailer required (phew!!!). REN X 137 fits my model of Triton 10ft Clam shell. Stopped at the dealer today and they loaded up a sled. No room to spare, but fits.

    Posting pics in the other post.

    Thanks for the input on trailer options, but my Triton just keeps on working.

    Dammit Gadgetman - this is snowmobiling! This thriftiness you are displaying is way out of character and extremely contrary to the stereotype! (glad your sled fits in your old trailer) ;-)

    • Like 1
  14. 6 hours ago, skidooboy said:

    the prostarr hybrid with the rear ramp, is on my short list of trailers I would buy. I need one for the house in Dub but, because of travel restrictions, and not having sleds here in the states now, I have not been actively searching, or wanting to order one. personally I am looking at the 13' for the extra room to kick the tails out, and be able to haul the fishing sleigh. these trailers are built in michigan, and seem to be a decent build package. Ski

    I scrubbed the Made in Michigan decal off the sides as I thought that the poor spelling would reflect badly on the state's education system....:wink:

     

    bullit.JPG.fc7352edbf39fad6e7ff6dd68abe89e3.JPG

    2 hours ago, volunteer2 said:

    The axels are Kennedy from what I saw.  Are they made in America ?  The other torsion is the Dexter   I have a couple United trailers with the Dexter's one is an 06 and no issues. Just wondering about the Kenedy unit and quality.  I know a bit late now to ask  

    The axle on mine is from Lippert. U.S. made and parts available.  I am talking about the inline hybrid 7'X 16' , so there is no confusion.  

     

    https://actiontrailers.ca/shop/build-a-trailer/snowmobile-motorcycle/inline-hybrid/sled-shed-aluminum-pro-starr-bullet-series-rear-ramp-door-7-wide-inline-hybrid-snowmobile/

     

    The Prostarr Bullit hybrid advertised on Action Trailer website does not have a front door. However you can get on as an option AND if you want six inches of extra interior height, you can get that as an option as well. Blake and I are rather compact (but husky) so the height is bearable for the sledding season - those taller folks might want to increase the height.

     

    The Bullitt tows very well and I like the seven foot width as opposed to the eight foot width. Helps on the highway and backing into places. The extra room for gear in addition to two machines comes in handy. 

     

    interior.thumb.JPG.7f8d6bda643a1a80f881b392d5758cde.JPG

     

     

     

     

     

     

    • Like 2
  15. On this topic - I usually keep a DESS key in the console of the truck for the convenience when unloading sled from trailer at destination and the other key is packed with my riding gear. Does anyone know if sitting in the cold for long periods reduces any type of battery life in the DESS key? How about the necessity of keeping the DESS keys away - at least  5 feet - from other "programmed" keys such as those for your truck?

  16. 6 hours ago, revrnd said:

    As slomo once said, it's too bad people w/ no sense of customer service buy these places. 

    It may very well be that what passes for good quality and excellence is different in other countries than what is expected here. In the case of the Pinewood in Barry's Bay, the previous owners were always upgrading and making improvement to the facility including some not usually noticed by patrons - better ventilation, hard wood floors, better mattresses etc. and promoted a sense of concern for the environment. I hope they received a good return on their initial investment and hard work.

     

    Thanks Grover for the mention of the Mountain View by Wilno - had no reason to try it out before but reviews are good and it is right on the trail.

    • Like 3
  17. The Pinewood was our place of choice in Barry's Bay - we enjoyed quite a good relationship with the previous owners who moved to Barry's Bay and motel ownership to get out of the city.....hopefully the new owners can keep the same level of service as previously provided....motel is right on the trail....

    Article:

     

    https://thevalleygazette.ca/new-owners-of-pinewood-inn-receive-warm-welcome-from-locals/?fbclid=IwAR00nvW6Kcagml9SolYG2Kd4SFptrgsa84OiScQWuX2758V1kiKSms75DkQ

     

    "The Pinewood Inn on Highway 62 in Barry’s Bay has new owners, and they are happy to be here. In December the deal to purchase the motel was finalized, and on March 11th the new owners officially took over the operation of the business.....

     

    .....The Patels are originally from Anand, a city in the state of Gujarat India with a population of 218,486. Anand is known as the “Milk Capital” of India and has a diverse economy based on agriculture and manufacturing and technology.......

    ....Snehal Patel left Anand in 2011, immigrating to Canada and settling in Orillia. The Patel family owns multiple business properties besides the Pinewood, including the Oakwood Motel, Gravenhurst, Muskoka and Caswell Resort Hotel, Sundridge, Parry Sound."

     

    Many sledders stayed at the Ashgrove motel due to the proximate restaurant.

  18. 5 hours ago, PISTON LAKE CRUISER said:

    Love pancakes in the morning Slomo but not sure putting 2 beers in the batter would be good when you are going to be riding unfamiliar areas.

    Good eye PLC!  - makes the batter doubly useful - pancakes and dipping for a fish fry.

    BTW - a good recipe if you've got a bit of cod around the house...

     

    1392381522_fishbatterrecipe.thumb.jpg.24e59b6184673227defd7db311c92b1e.jpg

     

    Not sure how it would work with pancakes....;)

     

     

  19. What the heck is going on here anyway?.....

     

    1618306249_sleddingcanoe.thumb.jpg.bf992f634d3455b4e4b466e01e2e8f54.jpg

     

    Story here:

     

    https://www.cbc.ca/news/canada/north/yukon-snowmobile-on-water-lake-laberge-1.3514740?fbclid=IwAR3SasZCIFKKLyfC-hqM1hH1hJqQwq4gDffssOL23wvdq7D1WJn2ThdgJ0A

     

    In further news, becoming quite impressed with the improvement in Newfoundland tourism since living there in the '90's and subsequent visits. Been researching and compiling trail side accommodations and motels for upcoming trips - well worth looking into if you're adventurous and courageous enough to go some place different instead of the same old... same old ....over and over blah... blah... blah... again. A big find though came while scanning amenities at the Holiday Inn Express in Deer Lake Nfld...looking forward to trying it out......

     

    pancakemachine.thumb.jpg.96288493aca1051d2050bb4e1713d43f.jpg

     

    First waffle machines and now this! 

    • Like 2
    • Thanks 1
  20. 1 hour ago, probill said:

    Unfortunately no. For some reason you always wanted to have your sled tarped up when parked. I will have to call around to a few dealers and see if they have any in stock. I imagine not but its worth a try. 

    Not sure what their "walk in" status is these days, but Bennett's in Whitby has had end of season discounts on instore BRP stuff - bags, gas cans, etc. See what they have in stock.

×
×
  • Create New...