revrnd Posted July 30, 2020 Share Posted July 30, 2020 On 7/15/2020 at 2:15 PM, Ox said: I love my flatbed truck! Only issue I ever had was one time when I was passing a string of trailers headin' north and just as I got beside the rubber duck, mine came loose. All ended well, but there was quite a few rough seconds in there for us all... Parked in the bush and all.... Turned out that my 4wd actuator wasn't working, and I was in 2wd. Didn't even figger that out 'till the next summer. (Sorry for the thread hijack) What truck was that w/ the faulty actuator? Quote Link to comment Share on other sites More sharing options...
Ox Posted July 30, 2020 Share Posted July 30, 2020 '99 Dodge 1 ton 1 Quote Link to comment Share on other sites More sharing options...
revrnd Posted July 30, 2020 Share Posted July 30, 2020 54 minutes ago, Ox said: '99 Dodge 1 ton OK, I knew GM has had issues with their front axle disconnect from '88 to the late 90s. BTDT Back to our normally scheduled programming. Quote Link to comment Share on other sites More sharing options...
Turbo Doo Posted July 30, 2020 Share Posted July 30, 2020 6 hours ago, Ox said: Cad is a very expensive and seldom used process, let alone for hardware. You sure that you don't mean yellow zinc? "Yes - the mfgr used 1/8" profile alum and the bolts pulled through without a thought aboot it, but the bolts are fine..." Zinc, yes.. 1 Quote Link to comment Share on other sites More sharing options...
coldfinger Posted July 30, 2020 Share Posted July 30, 2020 Had a bit of a rattle coming from under the trailer the past few days. Took a look today and to my surprise both sides are worn out! Any idea where I can source these parts in the KW area? I'll be heading to Princess Auto tomorrow but always nice to have a back up plan. Thanks in advance. Have a good long weekend, while I deal with rusty bolts and bushings. I am guaranteed at least one bloody knuckle. Quote Link to comment Share on other sites More sharing options...
sledjunk Posted July 30, 2020 Share Posted July 30, 2020 PA should have them. That is where I sourced them for my car hauler when I rebuilt it. Quote Link to comment Share on other sites More sharing options...
Dave K Posted July 30, 2020 Author Share Posted July 30, 2020 7 minutes ago, coldfinger said: Had a bit of a rattle coming from under the trailer the past few days. Took a look today and to my surprise both sides are worn out! Any idea where I can source these parts in the KW area? I'll be heading to Princess Auto tomorrow but always nice to have a back up plan. Thanks in advance. Have a good long weekend, while I deal with rusty bolts and bushings. I am guaranteed at least one bloody knuckle. Sauders camping in Stjacobs 1 Quote Link to comment Share on other sites More sharing options...
revrnd Posted July 30, 2020 Share Posted July 30, 2020 On 7/16/2020 at 10:51 AM, sledjunk said: Dexter Axles are set up that way. There may be another brand as well, but I'm not sure. I found out the hard way that Dexter EZ Lube axles can cause problems as well.... Quote Link to comment Share on other sites More sharing options...
Sksman Posted July 31, 2020 Share Posted July 31, 2020 1 hour ago, coldfinger said: Had a bit of a rattle coming from under the trailer the past few days. Took a look today and to my surprise both sides are worn out! Any idea where I can source these parts in the KW area? I'll be heading to Princess Auto tomorrow but always nice to have a back up plan. Thanks in advance. Have a good long weekend, while I deal with rusty bolts and bushings. I am guaranteed at least one bloody knuckle. You can try Cerka in Milton. They make trailers. I would think higher quality then Princess Auto but cannot verify that. 1 Quote Link to comment Share on other sites More sharing options...
revrnd Posted July 31, 2020 Share Posted July 31, 2020 1 hour ago, coldfinger said: Had a bit of a rattle coming from under the trailer the past few days. Took a look today and to my surprise both sides are worn out! Any idea where I can source these parts in the KW area? I'll be heading to Princess Auto tomorrow but always nice to have a back up plan. Thanks in advance. Have a good long weekend, while I deal with rusty bolts and bushings. I am guaranteed at least one bloody knuckle. Does the 'pivot' need replacing too? I'm sure the 'shackles could be easily fabbed. 1/4" or 5/16" x 1" CRS? Make an extra set, so you're not running around looking for new ones next time. Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted July 31, 2020 Share Posted July 31, 2020 1 hour ago, Dave K said: Sauders camping in Stjacobs I second that and I usually let them do work. Arnie’s rates are very reasonable. 1 Quote Link to comment Share on other sites More sharing options...
Ox Posted July 31, 2020 Share Posted July 31, 2020 (edited) HR will likely not rust as quick. Either way tho - I'd go heavier if that's an option, and I wouldn't know why it wouldn't be. . Edited July 31, 2020 by Ox Quote Link to comment Share on other sites More sharing options...
volunteer2 Posted July 31, 2020 Share Posted July 31, 2020 6 hours ago, coldfinger said: Had a bit of a rattle coming from under the trailer the past few days. Took a look today and to my surprise both sides are worn out! Any idea where I can source these parts in the KW area? I'll be heading to Princess Auto tomorrow but always nice to have a back up plan. Thanks in advance. Have a good long weekend, while I deal with rusty bolts and bushings. I am guaranteed at least one bloody knuckle. Breslau the spring place it was Delta spring but the name has changed. Near the old Polaris dealer lol. Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted July 31, 2020 Share Posted July 31, 2020 9 hours ago, volunteer2 said: Breslau the spring place it was Delta spring but the name has changed. Near the old Polaris dealer lol. Wheelie sports or something like that. A guy name Wayne ran it. One of worst dealers in area at the time. I had another dealer fix everything they screwed up. Quote Link to comment Share on other sites More sharing options...
PISTON LAKE CRUISER Posted July 31, 2020 Share Posted July 31, 2020 12 hours ago, volunteer2 said: Breslau the spring place it was Delta spring but the name has changed. Near the old Polaris dealer lol. I thought that place closed a while after the "new" owners took over. If Coldfinger hasn't found the pieces yet, I would try KW Suspension on Courtland near the expressway. Quote Link to comment Share on other sites More sharing options...
volunteer2 Posted July 31, 2020 Share Posted July 31, 2020 13 minutes ago, PISTON LAKE CRUISER said: I thought that place closed a while after the "new" owners took over. If Coldfinger hasn't found the pieces yet, I would try KW Suspension on Courtland near the expressway. Yup good point. Got stuff from them too in the past. Did get new leaves put in my 08 a few years back on Breslau. Not sure if thry are still there today Quote Link to comment Share on other sites More sharing options...
PISTON LAKE CRUISER Posted July 31, 2020 Share Posted July 31, 2020 8 minutes ago, volunteer2 said: Yup good point. Got stuff from them too in the past. Did get new leaves put in my 08 a few years back on Breslau. Not sure if thry are still there today Delta changed to Drive Products ( a company from Missassauga) and then they shut it down after a year or two, probably about 5 years ago now. 1 Quote Link to comment Share on other sites More sharing options...
coldfinger Posted August 2, 2020 Share Posted August 2, 2020 Since l was working in Petersburg went to Sauders in Heidelberg .They had complete tandem axle rebuild kits every thing l needed 87 $ all in. Took them awhile to find the kits so l wondered the lot , came across an enclosed trailer l could use for work and hauling sleds .My controller gave me the ok to make the deal . Cheers to the guys who suggested Sauders . 4 Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 2, 2020 Share Posted August 2, 2020 8 hours ago, coldfinger said: Since l was working in Petersburg went to Sauders in Heidelberg .They had complete tandem axle rebuild kits every thing l needed 87 $ all in. Took them awhile to find the kits so l wondered the lot , came across an enclosed trailer l could use for work and hauling sleds .My controller gave me the ok to make the deal . Cheers to the guys who suggested Sauders . You buy a lightning product from forest river I am assuming? Quote Link to comment Share on other sites More sharing options...
coldfinger Posted August 2, 2020 Share Posted August 2, 2020 Whats your opinion on the lighting trailers ? Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 2, 2020 Share Posted August 2, 2020 2 minutes ago, coldfinger said: Whats your opinion on the lighting trailers ? Owned one since 2010. Haven’t had any issues with trailer or wiring. Has worked out well for hauling farm tractors around and building materials etc. Seem to be well built and good value for money. Mine was all good quality plywood at the time too and I had arnie spray linex over top before picking trailer up. Quote Link to comment Share on other sites More sharing options...
volunteer2 Posted August 7, 2020 Share Posted August 7, 2020 On 8/2/2020 at 10:17 AM, coldfinger said: Since l was working in Petersburg went to Sauders in Heidelberg .They had complete tandem axle rebuild kits every thing l needed 87 $ all in. Took them awhile to find the kits so l wondered the lot , came across an enclosed trailer l could use for work and hauling sleds .My controller gave me the ok to make the deal . Cheers to the guys who suggested Sauders . Let's get a pic posted. Quote Link to comment Share on other sites More sharing options...
coldfinger Posted August 8, 2020 Share Posted August 8, 2020 Soon, have not picked it up yet Sauders is busy with the camping trailers . 1 Quote Link to comment Share on other sites More sharing options...
Strong Farmer Posted August 8, 2020 Share Posted August 8, 2020 12 minutes ago, coldfinger said: Soon, have not picked it up yet Sauders is busy with the camping trailers . They are a busy place but Arnie always had my trailer ready when I needed it. So if you need it, I am sure he can get it done. Can’t wait to see pictures. Going to spray fly with line x and sand too. He does a great job with that. Holds up really well to carbides too. Quote Link to comment Share on other sites More sharing options...
Blackstar Posted August 10, 2020 Share Posted August 10, 2020 On 7/31/2020 at 2:25 PM, volunteer2 said: Yup good point. Got stuff from them too in the past. Did get new leaves put in my 08 a few years back on Breslau. Not sure if thry are still there today On 7/31/2020 at 2:37 PM, PISTON LAKE CRUISER said: Delta changed to Drive Products ( a company from Missassauga) and then they shut it down after a year or two, probably about 5 years ago now. Its been First Class Fleet Services for a couple years now. I've had a few of my trucks in there. They are quick and very fair on pricing. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.