Jump to content

Recommended Posts

Posted

Heard bala area got 4 Ft of snow this weekend 

 

  • 1 month later...
Posted

We must've lost this piece connecting d101!? I think it used to run up Billy bear rd for a bit then shoot north. Thats a bummer for getting up to Kearney. The alternative 78,79 has some aweful road stretch's. 

IMG_9638.jpeg

Posted
1 hour ago, Steve F6 said:

We must've lost this piece connecting d101!? I think it used to run up Billy bear rd for a bit then shoot north. Thats a bummer for getting up to Kearney. The alternative 78,79 has some aweful road stretch's. 

IMG_9638.jpeg

Could it be that the club is still trying to get 1 or more MOU(s) signed? The trail won't show up on the ITG until they are all signed and submitted. 

  • Like 1
Posted
2 hours ago, PISTON LAKE CRUISER said:

Could it be that the club is still trying to get 1 or more MOU(s) signed? The trail won't show up on the ITG until they are all signed and submitted. 

Im not sure. Could be mou issue but i havent noticed the club say anything about it. I also haven't ridden up that way in a few years with the low snow. Maybe its been closed a couple years and i didnt notice on the map. Someone will chime in maybe.

  • Like 1
Posted

I was there last year .it was open then i think,first time there .

  • 2 weeks later...
Posted

HGR has their open house this Saturday. 10am till late afternoon at the HGR groomer shop on d103/beaver meadow road. This is the 60th year for the club. I'll be there with some vintage sleds, others vintage sleds too, pisten bully will be there for the kids to check out. Burgers hotdogs coffee hot chocolate. All donation. We're also putting together a tshirt/sweatshirt/hats order using the old school logo like the one below i believe. Come on out tomorrow and say hello, the trails will be mint! image.png.384136235a9c1bb60696188fe28c6956.png

  • Like 1
  • 10 months later...
Posted

Baysville opened up their good sections!  I just might do that tonight. They are also looking for help tomorrow to help clear the fraserburg, purbrook trails.

Posted

Also i noticed that the d101b is connected this year between highland rovers and ASC. Thats good news for everyone. Hats off to those that put the work in on that important link. Not sure what the issue was. 

IMG_0671.jpeg

  • Like 2
Posted

I was out helping Baysville brushing yesterday down to purbrook. I was told that they would taking over grooming of the often neglected B trail over to hwy 35.  Great news! IMG_0675.thumb.jpeg.fb2a0cb14d4e84417937687bff7cbaec.jpeg

I came back thru bigwin park on B to their open sections. Open stuff is pretty darn good as usual. Tapping the odd rock. The 850 enjoyed eating its first good meal of 91 and redline for the season.IMG_0673.thumb.jpeg.acca5354a1425c2ea6a81c23b4c66869.jpeg

  • Like 2
  • 4 weeks later...
Posted

IMG_0787.thumb.jpeg.d0c68b68c3bbca795258302c35724ec2.jpeg 

Magic carpet ride on d103 tonight. Enjoy🍻

  • Like 1
Posted

In real nice shape in ASC and Tall pines area today. A bit on the loose side on d101 to asc shelterbut the carbides never scraped a rock which i've never seen on a saturday in that area. 76 was mint! 65 66 and the wolf loop were good, few face slappers and off cambered coners but no complaints. Fuel at Mountain Trout House. Only bad spot was west of Raven lk on d101 where the summer atv's have made it hard to groom. Been like that a while now and only gets worse each year in that small section. Dinner at Cast Iron, then hammered it back home thru hgr. Not much traffic today. Very little if any chatter bumps after supper. The Rmotion still got its feeding but not like a usual saturday evening around here. 258km

IMG_0788.jpeg

IMG_0791.jpeg

IMG_0793.jpeg

  • Like 2
  • 3 weeks later...
Posted

I noticed while riding thru dorset recently that Trading Bay is open this year. Lunch, dinner hours. No breakfast by the looks of it. IMG_0872.thumb.png.f765238290cab6b97954150b8e7f6d25.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...