Jump to content

Lets see your new sleds !


chez-nous cest skidoo

Recommended Posts

This is my new ride for this year .. new 2017 MXZ X-1200 ... somehow a nearby dealer had it new in a crate, picked it up in October .... bring on the snow !

 

cheers

Resized_20171014_133605.jpg

Resized_20171014_133546001.jpg

Link to comment
Share on other sites

  • Replies 81
  • Created
  • Last Reply

IMG_2620.thumb.JPG.e21fec8c017b90101b073695c8c74f60.JPGIMG_2621.thumb.JPG.db526091566e92389d64e29fb1684a8e.JPG

theres mine...never been so excited to be back on a 2 stroke!

Link to comment
Share on other sites

Here's my new ride.

Let it SNOW!!

 

IMG_2563.thumb.JPG.72e6048b9a967693005712272041cdc0.JPG

Link to comment
Share on other sites

Very nice!

Link to comment
Share on other sites

My NOS 2014

IMG_0583.JPG

Link to comment
Share on other sites

Here's my new ride, picked up in October...MXZ Blizzard 900ACE, with RMotion 129" skid.  I finally got around to taking some pics today...

 

Comes pretty well-equipped, so it's mostly stock, but I did add a few extras...a full-body skid plate, a heated visor plug, a 12V outlet, mirrors, more aggressive carbides, adjustable toe-holds in the foot-wells, and a higher windshield for those long rides on cold days in the north.  Moved my LINQ brackets and cargo bag clips over from my previous sled, so I could re-use the touring bags shown in a couple of the pics below.  I also installed  a couple of sledjunk's posts on the skis to allow the use of my existing Blizzer ice scratchers. 

 

Bring on the cold and snow...!

 

IMG_4457.thumb.JPG.8df50eff9b16d94e5b39916a2f11518f.JPG

 

IMG_4455.thumb.JPG.60744e57a31fc17ff5c9d260cfeb5bca.JPG

IMG_4458.thumb.JPG.25c32ec11f827618b11d144cb0026b0c.JPG

All ready for our saddle-bagging trips...IMG_4460.thumb.JPG.a6a55ddb299a4dc965646b55d6d88535.JPG

IMG_4456.thumb.JPG.c64a9a0bfc77c792bd6e6cf34a73ddc4.JPGIMG_4461.thumb.JPG.3db455403f65b0cc2fd2fbb6cd2dc1d8.JPGIMG_4453.thumb.JPG.c5d8458bfbf35f20dab560bcdda1b72b.JPG.

Link to comment
Share on other sites

No glove box extension Bob ?  Makes a nice partially heated compartment for electronics  with the 12v adapter in there....

 

Nice sled!!

Link to comment
Share on other sites

NTM 2016 Blizzard, 900 Ace, ran into a friend I ride with at St Onge, 2 weeks later he has a new 2018 and I have a ntm 2016, 2 up heated seat, ice scratchers and 2 very happy snowmobilers.

can't wait.

new sled.JPG

Link to comment
Share on other sites

just waiting on the install kit. some assembly required. ;)  Ski

crated tsled kit.JPG

Link to comment
Share on other sites

SKI

looks like a pretty big job converting your bike ?????? post some pics when completed:icon_photo:

Greg

Link to comment
Share on other sites

14 hours ago, Denis007 said:

No glove box extension Bob ?  Makes a nice partially heated compartment for electronics  with the 12v adapter in there....

 

Nice sled!!

While I agree it's a nice add on, the glovebox is in no way partially heated.  I had a liner in mine last winter along with the 12 V plug.  The phone was warm until I put it in the glovebox.  It froze and wouldn't take a charge.  Took it back inside in the heat and it charged right away.  You need a bag heater in the glovebox if you want to keep electronics in there.

Link to comment
Share on other sites

17 hours ago, irREVerent said:

Here's my new ride, picked up in October...MXZ Blizzard 900ACE, with RMotion 129" skid.  I finally got around to taking some pics today...

 

Comes pretty well-equipped, so it's mostly stock, but I did add a few extras...a full-body skid plate, a heated visor plug, a 12V outlet, mirrors, more aggressive carbides, adjustable toe-holds in the foot-wells, and a higher windshield for those long rides on cold days in the north.  Moved my LINQ brackets and cargo bag clips over from my previous sled, so I could re-use the touring bags shown in a couple of the pics below.  I also installed  a couple of sledjunk's posts on the skis to allow the use of my existing Blizzer ice scratchers. 

 

Bring on the cold and snow...!

 

IMG_4457.thumb.JPG.8df50eff9b16d94e5b39916a2f11518f.JPG

 

IMG_4455.thumb.JPG.60744e57a31fc17ff5c9d260cfeb5bca.JPG

IMG_4458.thumb.JPG.25c32ec11f827618b11d144cb0026b0c.JPG

All ready for our saddle-bagging trips...IMG_4460.thumb.JPG.a6a55ddb299a4dc965646b55d6d88535.JPG

IMG_4456.thumb.JPG.c64a9a0bfc77c792bd6e6cf34a73ddc4.JPGIMG_4461.thumb.JPG.3db455403f65b0cc2fd2fbb6cd2dc1d8.JPGIMG_4453.thumb.JPG.c5d8458bfbf35f20dab560bcdda1b72b.JPG.

Can you post a close up of the posts for the ice scratchers.  Not trying to hijack the forum, but I've been looking for a solution of that sort.  

Link to comment
Share on other sites

28 minutes ago, signfan said:

While I agree it's a nice add on, the glovebox is in no way partially heated.  I had a liner in mine last winter along with the 12 V plug.  The phone was warm until I put it in the glovebox.  It froze and wouldn't take a charge.  Took it back inside in the heat and it charged right away.  You need a bag heater in the glovebox if you want to keep electronics in there.

I always put my phone in a wool sock and just put it in my inside pocket close to my chest. Never drains and always stays warm...just make sure you go out with a full charge.

Link to comment
Share on other sites

1 hour ago, zrtkat said:

SKI

looks like a pretty big job converting your bike ?????? post some pics when completed:icon_photo:

Greg

Greg, it is actually not as bad as it looks. you remove the rear shock and swing arm as an assembly from the bike, and install the rear skid in that location. then remove the front wheel, and install the spindle and ski. the hardest part is, all of the stuff you must do to prevent over fueling due the cold temps (especially on an efi bike). they need a thermostat installed to control temps when cold, to keep the bike at operating temp, and in deep snow due to saturation, an engine blanket, protector, to keep the snow and cold out, and the warmth in. as they do not have a thermostat in dirtbike form. you have to add heated grips. they only have a 2-3 gallon tank so, you are not touring on these at all. they were made to go to a play area, play, refuel, and play, then load and go home.

 

Ski

Link to comment
Share on other sites

18 hours ago, irREVerent said:

Here's my new ride, picked up in October...MXZ Blizzard 900ACE, with RMotion 129" skid.  I finally got around to taking some pics today...

 

Comes pretty well-equipped, so it's mostly stock, but I did add a few extras...a full-body skid plate, a heated visor plug, a 12V outlet, mirrors, more aggressive carbides, adjustable toe-holds in the foot-wells, and a higher windshield for those long rides on cold days in the north.  Moved my LINQ brackets and cargo bag clips over from my previous sled, so I could re-use the touring bags shown in a couple of the pics below.  I also installed  a couple of sledjunk's posts on the skis to allow the use of my existing Blizzer ice scratchers. 

 

Bring on the cold and snow...!

 

IMG_4457.thumb.JPG.8df50eff9b16d94e5b39916a2f11518f.JPG

 

IMG_4455.thumb.JPG.60744e57a31fc17ff5c9d260cfeb5bca.JPG

IMG_4458.thumb.JPG.25c32ec11f827618b11d144cb0026b0c.JPG

All ready for our saddle-bagging trips...IMG_4460.thumb.JPG.a6a55ddb299a4dc965646b55d6d88535.JPG

IMG_4456.thumb.JPG.c64a9a0bfc77c792bd6e6cf34a73ddc4.JPGIMG_4461.thumb.JPG.3db455403f65b0cc2fd2fbb6cd2dc1d8.JPGIMG_4453.thumb.JPG.c5d8458bfbf35f20dab560bcdda1b72b.JPG.

Looking good..

Link to comment
Share on other sites

1 hour ago, signfan said:

Can you post a close up of the posts for the ice scratchers.  Not trying to hijack the forum, but I've been looking for a solution of that sort.  

Here are some pics from the same sort of post installation on my previous sled....behind the ski spindle, on the inside rib of the ski. The only difference on my new sled is that I mounted the posts on the inside of the rib, instead of the outside, so they would be a little more "protected" behind the spindle.  This first pic shows the post with a protective vinyl cap in place, when the scratcher is not being used.  5a0867d57b389_IMG_2738(Large).thumb.JPG.4989a54e64d2fc211143ba8241a21684.JPGn my

 

Here's another one showing the post (with cap in place), from a different angle:

 

5a0867fd011da_IMG_2739(Large).thumb.JPG.ad0d814a5af48bb5f6a978a09ac6b034.JPG 

 

Here's one of the post without the cap in place;  the post is aluminum, and the hardware is stainless steel:

 

5a0867e560e5c_IMG_2741(Large).thumb.JPG.f5286f0e21fc08f4c61082fdcea94b0a.JPG

 

Here are 3 pics with the scratchers installed on the posts;  the Blizzers are attached to mounts which slide down over the posts and are held in place by a small "P-style" locking clip, same as the type used on the pin for your trailer hitch draw-bar:

 

5a08680a3530f_IMG_2735(Large).thumb.JPG.eb9bff92e1d8dc4d69ae4a37e45eff29.JPG

5a0868328b3dc_IMG_2737(Large).thumb.JPG.e005e675cecf2b1a01b01a5c3b4b0d75.JPG

5a08681fb538c_IMG_2736(Large).thumb.JPG.1fcd7f77889fcb37c503a4c1bc74115f.JPG

 

Hope that helps, signfan.  Send sledjunk a PM if you are interested in more information on installation and/or availability.

Link to comment
Share on other sites

50 minutes ago, IQ TURBO said:

Looking good..

Thanks, IQ...hope we can ride together sometime this winter.

Link to comment
Share on other sites

15 hours ago, Denis007 said:

No glove box extension Bob ?  Makes a nice partially heated compartment for electronics  with the 12v adapter in there....

 

Nice sled!!

Thanks, Denis. 

 

I do have the glovebox liner, to keep the snow dust out, but so far, I haven't bothered with the extension or the 3W heater.  If necessary, I can just leave my phone or GoPro connected to the USB adapter I leave plugged into the the 12V outlet. 

Link to comment
Share on other sites

1 hour ago, Baylaker said:

I always put my phone in a wool sock and just put it in my inside pocket close to my chest. Never drains and always stays warm...just make sure you go out with a full charge.

I don't use the sock but like you put it in the inside pocket of the jacket. Never had a problem with it losing charge due to cold.

Link to comment
Share on other sites

6 hours ago, KW Mike said:

NTM 2016 Blizzard, 900 Ace, ran into a friend I ride with at St Onge, 2 weeks later he has a new 2018 and I have a ntm 2016, 2 up heated seat, ice scratchers and 2 very happy snowmobilers.

can't wait.

new sled.JPG

nice looking sled, that looks like the power line hill at the top of the abitibi.

Link to comment
Share on other sites

8 hours ago, irREVerent said:

Thanks, Denis. 

 

I do have the glovebox liner, to keep the snow dust out, but so far, I haven't bothered with the extension or the 3W heater.  If necessary, I can just leave my phone or GoPro connected to the USB adapter I leave plugged into the the 12V outlet. 

 

Ok .... I had mine wrapped in a spare toque while plugged in and it would charge the battery. A Crown Royal bag works well too .. :)

 

Link to comment
Share on other sites

There is a goggle storage compartment on our sleds that is just below the instrument cluster and gets quite a bit of engine heat. I imagine I could store the phone in there but inside the jacket works just fine. I'm also thinking that in a worst case scenario like the sled going through the ice, I would still have the phone if it's in my inside pocket but if it's in a compartment on the sled it's gone if I needed to call for help.

Link to comment
Share on other sites

Correct ToSlow, hoping for a ride there in early January. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...